Beckmann+Egle
This driver supports the serial "Mini-Terminals" made by Beckmann+Egle:
With the upcoming 0.10 version of lcd4linux, the new CompactTerminals will be supported, too.
These controllers provide a lot of additional features, and my be extended with various modules:
key module:
I/O module:
LAN module:
With the current lcd4linux 0.9.11, only the following "MultiTerminal" display types are supported and must be specified in the configuration with the Type key:
| Type | Columns | Rows |
| 0 | 16 | 1 |
| 1 | 16 | 2 |
| 2 | 16 | 4 |
| 3 | 20 | 1 |
| 4 | 20 | 2 |
| 5 | 20 | 4 |
| 6 | 24 | 1 |
| 7 | 24 | 2 |
| 8 | 32 | 1 |
| 9 | 32 | 2 |
| 10 | 40 | 1 |
| 11 | 40 | 2 |
| 12 | 40 | 4 |
Configuration:
The driver needs/supports the following entries in lcd4linux.conf:
Display: "BLC100x")
Port: serial device the device is attached to (e.g."/dev/ttyS2")
Type: [columns]x[rows], e.g."40x4")
